
Ventori Descaler
Remove mineral scale from compatible Philips descaling programmes.
Add to basketPrefer Amazon? Buy there ↗Philips 5400 Series
Follow illustrated steps and short videos for the brew group, coffee-oil cleaning, descaling and AquaClean filter changes. Start with the task your Philips 5400 needs.


Remove mineral scale from compatible Philips descaling programmes.
Add to basketPrefer Amazon? Buy there ↗
Clean coffee oils using compatible automatic cleaning programmes.
Add to basketPrefer Amazon? Buy there ↗.png)
Compatible water filters to support everyday water care.

1 compatible filter, 6 descaler tablets and 6 bean-to-cup cleaner tablets.

Milk-system care for compatible cleaning programmes. Check your model.
Quick video guides
Three short guides cover the most common Philips 5400 maintenance tasks.
Maintenance schedule
The 5400 guides many maintenance jobs through its display. AquaClean status, the Clean menu and on-screen prompts should take priority over a generic fixed timetable.
Empty as needed and keep both areas clean.
Use Quick Milk Clean and keep both removable LatteGo parts clean.
Remove, rinse with lukewarm water and let it dry.
Run Brew group clean from the Clean menu.
Replace and activate the new filter in Settings.
Use Clean → Descaling and complete the full guided rinse.
Your machine is already selected. Add your local water hardness and typical use to build a personalised Care Schedule without choosing the manufacturer or model again.
Weekly care

Use the normal power control and wait for shutdown to finish.

Open the service door, press PUSH and carefully pull the brew group towards you.

Rinse with lukewarm water and clear visible coffee residue.

Drain excess water and let the brew group dry naturally.

Slide the brew group back into its guides until secure and close the service door.
Water filtration
Installing the filter physically is only half the job — the machine also needs to know the new filter is fitted.

Shake it for about 5 seconds, then prime it upside down in cold water until the bubbles stop.

Push the filter vertically onto the tank connection and refill with fresh water.

Tap Settings and select AquaClean.

Confirm the new filter and follow the on-screen activation instructions.

Replace the filter when requested by the machine, then activate the replacement in AquaClean settings.
Display-guided descaling
The 5400 guides the process through the Clean menu, including the final rinse.

Tap Clean, select Descaling and follow the display.

Remove LatteGo, empty and refit the drip tray and grounds container.

Remove and empty the water tank, then take out the AquaClean filter.

Prepare descaler according to its instructions and fill to the required Calc/Clean level.

Put at least a 1.5 litre container under the outlets and start when instructed.

Rinse and refill the tank with fresh water when prompted and let the rinse finish.

When complete, refit and activate filtration if you use AquaClean.
Monthly deep clean
Philips uses the Clean menu to guide this job on compatible 5400 machines. Follow the display rather than trying to memorise a long manual sequence.

Switch the machine on, tap Clean and select Brew group clean.
Confirm the guided cleaning programme on the display.
Put the suitable coffee-oil cleaning tablet in the pre-ground compartment when instructed.
Complete the on-screen steps and allow the cleaning and rinse process to finish.
Relevant Ventori care
Descaler handles mineral build-up. Bean-to-cup cleaner handles coffee residue. Water filtration sits alongside both.
VENTORI · COMING SOON

Coming soon for compatible milk-system cleaning procedures. Not required for every 5400 variant; check your milk system and manual.
Explore Milk Cleaner