
Ventori Descaler
Remove mineral scale from compatible Philips descaling programmes.
Add to basketPrefer Amazon? Buy there ↗Philips 4300 Series
Use the Philips 4300 Clean menu to descale or run a brew-group cleaning cycle, and follow the correct AquaClean activation steps. Short videos and a free care schedule are included.


Remove mineral scale from compatible Philips descaling programmes.
Add to basketPrefer Amazon? Buy there ↗
Clean coffee oils using compatible automatic cleaning programmes.
Add to basketPrefer Amazon? Buy there ↗.png)
Compatible water filters to support everyday water care.

1 compatible filter, 6 descaler tablets and 6 bean-to-cup cleaner tablets.

Milk-system care for compatible cleaning programmes. Check your model.
Quick video guides
Three short guides cover the most common Philips 4300 maintenance tasks.
Maintenance schedule
The 4300 handles several jobs through its display, so machine prompts should take priority where they appear.
Empty as needed and keep both areas clean.
Remove, rinse with lukewarm water and let it dry.
Run the Brew group clean programme from the Clean menu.
Lubricate more often when the machine is used heavily.
Replace and activate the new filter in the machine.
Use the 4300 descaling programme and complete the full rinse.
Your machine is already selected. Add your local water hardness and typical use to build a personalised Care Schedule without choosing the manufacturer or model again.
Weekly care

Use the normal power button and wait for shutdown to finish.

Lift out the tank so the service area is accessible.

Open the service door, press PUSH and draw the group out.

Use lukewarm water and clear visible coffee residue.

Drain excess water and let the brew group dry naturally.

Slide the brew group back in securely and refit the tank.
Water filtration
Installing the filter physically is only half the job — the machine also needs to know the new filter is fitted.

Shake it, then prime it upside down in cold water.

Push the filter firmly onto the tank connection.

Use Settings on the machine and select AquaClean.

Confirm the new filter and follow the on-screen prompts.

Replace it when the machine asks and reactivate the replacement.
Display-guided descaling
The 4300 guides the process through the Clean menu, including the final rinse. See Ventori Descaler Tablets if you need descaling solution.

Open Clean, choose Descaling and follow the display.

Remove milk parts, then empty and refit the drip tray and grounds box.

Take the filter out before starting the descale cycle.

Add descaler at the correct dose and fill to the required level.

Put at least a 1.5 litre container under the outlets and start.

Refill with fresh water when prompted and let the rinse finish.

When complete, refit and activate filtration if you use AquaClean.
Monthly deep clean
Philips uses the Clean menu to guide this job on compatible 4300 machines. Follow the display rather than trying to memorise a long manual sequence. View Ventori Bean-to-Cup Cleaner for compatible coffee-oil cleaning cycles.

Switch the machine on, tap the Clean icon and choose Brew group clean.
Select the cleaning programme and confirm it on the display.
Use the coffee-oil cleaning tablet when prompted and let the machine complete the programme.
After the programme, keep the removable brew group rinsed and fully dry before refitting.
Relevant Ventori care
Descaler handles mineral build-up. Bean-to-cup cleaner handles coffee residue. Water filtration sits alongside both.
VENTORI · COMING SOON

Coming soon for compatible milk-system cleaning procedures. Not required for every 4300 variant; check your milk system and manual.
Explore Milk Cleaner