
Ventori Espresso Cleaning Tablets
For compatible Sage cleaning cycles and group-head coffee-oil removal.
Add to basketPrefer Amazon? Buy there ↗Sage Barista Express
Run the Barista Express CLEAN ME cleaning cycle, follow its descale programme and maintain the steam wand and water filter. See model-specific steps and a free Care Schedule.


For compatible Sage cleaning cycles and group-head coffee-oil removal.
Add to basketPrefer Amazon? Buy there ↗
Remove mineral scale using your Sage model's appropriate descaling programme.
Add to basketPrefer Amazon? Buy there ↗
Compatible water-filter care for supported Sage machines. Check your model.

Compatible water filter, descaler and espresso cleaning tablets in one kit. Check model compatibility.

For compatible milk-system cleaning programmes only. Follow your Sage model's milk-care instructions.
Quick video guides
The Barista Express uses different control combinations for the cleaning and descale functions, so a quick visual check is useful.
Maintenance schedule
The CLEAN ME reminder relates to the coffee-oil cleaning cycle, not descaling. Descaling frequency depends much more on water hardness and use.
Purge and wipe the wand while it is still warm.
Flush the group head and rinse the basket and portafilter.
Run the backflush cleaning cycle with the cleaning disc and tablet when required.
Brush loose grounds and coffee residue from the burrs and grinder chamber.
Replace the fitted filter on the Sage replacement interval.
Descale the internal water circuit when scale build-up or your schedule indicates it is due.
Your machine is already selected. Add your local water hardness and typical use to build a personalised Care Schedule without choosing the manufacturer or model again.
Coffee-oil cleaning
This is the tablet cleaning/backflush cycle for the brew path. It is separate from descaling. See Ventori Espresso Cleaning Tablets for compatible cleaning-disc cycles.

Insert the 1 CUP basket, then the supplied cleaning disc into the portafilter.

Place one backflush cleaning tablet into the cleaning disc.

Lock the portafilter into the group head and make sure the drip tray is empty.

With the machine off, hold the 1 CUP, 2 CUP and POWER controls together until the cleaning cycle starts.

Allow the machine to complete the programmed backflush cycle without interrupting it.

Check the tablet has dissolved, remove the cleaning disc and run a clean-water rinse through the brew head.
Mineral scale care
The Barista Express descale function treats the coffee, steam and hot-water circuits separately before a final fresh-water rinse. View Ventori Descaler Tablets when you need compatible descaling solution.

Remove and empty the water tank before preparing the machine.

Take the fitted filter out before adding descaling solution.

Prepare the descaler according to its dosing instructions.

Add the prepared solution, refit the tank and place a large container beneath the outlets.

With the machine off, hold the 2 CUP control and POWER together to enter the descale function.

Use the 1 CUP control to run the coffee-circuit descale phase.

Use the steam dial as directed to run solution through the steam and hot-water circuits.

Discard the remaining solution, rinse the tank thoroughly and refill with fresh water.

Repeat the water-circuit steps with fresh water to clear descaling residue.

Water filtration
Sage's current guidance is to replace the filter after about 90 days or 40 litres. Water hardness and use can justify an earlier change.
Lift the filter holder from the water tank and remove the used filter.
Prime the replacement filter according to its instructions before fitting it into the holder.
Use the holder reminder dial so the next change is easy to track.
Lock the holder back into the tank, fill with fresh water and reinstall the tank.
After milk use
Milk residue is easiest to remove while the wand is still warm.

Purge steam for a few seconds immediately after milk use.

Wipe away milk residue with a clean damp cloth before it dries.

Give the wand another short purge to clear residue from inside the tip.

Use the supplied cleaning tool if the steam holes become restricted.
Integrated grinder
Routine dry brushing helps keep the grinder chamber cleaner without introducing moisture around the burrs.

Remove remaining beans before opening the grinder.

Unlock the hopper and lift the removable upper burr using its handle.

Use a dry brush to remove loose grounds and coffee residue. Keep water out of the grinder.

Refit the upper burr and hopper securely before adding fresh beans.
Relevant Ventori care
Backflush tablets remove coffee oils from the brew path. Descaler removes mineral scale from the water circuit. They are not interchangeable.