Milk system
Use the machine cleaning function and clean removable milk-contact parts.
De'Longhi Eletta Explore
Eletta Explore maintenance, organised around the jobs that matter.
A maintenance route for the Eletta Explore covering the infuser, water care, descaling and the machine’s milk systems.
Maintenance schedule
The useful baseline for your Eletta Explore.
Use the machine’s own prompt sooner whenever it asks for maintenance. Water hardness and usage can also change the practical timing.
VENTORI CARE · ANDROIDTrack this machine in Ventori Care.
Track this machine in Ventori Care ↗Keep this maintenance schedule, reminders, history and available guides with the machine instead of remembering the next job yourself.
Drip tray & grounds
Empty and clean waste areas as required.
Infuser
Remove and rinse the user-removable brew group.
Machine interior
Clear accessible loose coffee residue.
Water filter
Replace a fitted compatible filter or follow the machine prompt.
Descaling
Run the Eletta Explore descale programme and complete every rinse stage.
Personalise this schedule
Want Ventori to remember the De'Longhi Eletta Explore maintenance rhythm for you?
Your machine is already selected. Add local water hardness and typical use without choosing the manufacturer or model again.
Routine cleaning
Clean the Eletta Explore infuser.
Regular infuser care helps keep loose coffee residue out of the brew mechanism.
Power down normally
Switch the machine off using its normal control and allow the internal mechanism to park.
Open the service area
Remove the water tank or service panel in the order shown for your machine.
Remove the infuser carefully
Release the removable infuser without forcing it.
Rinse with water
Rinse loose coffee residue away with water only unless the machine instructions say otherwise.
Drain and refit
Let excess water drain, then reinstall the infuser securely before powering the machine back on.
Water filtration
Keep the Eletta Explore water filter current.
Prepare the compatible replacement and complete the machine-side filter setup after fitting it.
Remove the used filter
Take the existing compatible filter out of the water tank.
Prepare the replacement
Prime the new filter according to its instructions before fitting it.
Install it securely
Fit the prepared filter into the tank connection without forcing it.
Complete machine setup
Refill the tank and complete any filter activation or confirmation required by the machine.
Mineral scale care
Descale the Eletta Explore when prompted.
Use the machine’s own maintenance menu and follow its prompts rather than a generic De’Longhi button sequence.
Prepare the machine
Empty the appropriate waste containers and remove the filter if the machine procedure requests it.
Prepare the solution
Dose coffee-machine descaler and water according to the product and machine instructions.
Position a suitable container
Place a large collection container beneath the outlets used by the descale cycle.
Start the Eletta Explore descale programme
Open the machine maintenance menu and follow the on-screen descale prompts.
Complete all rinse stages
Rinse and refill the tank when asked and let the programme finish fully.
Restore filtration
Refit or replace the water filter where appropriate and complete any activation step.
Milk care
Clean the Eletta Explore milk system after use.
The quick-clean function is useful after drinks, but removable milk-contact parts still need regular physical cleaning.
Run the milk-system clean function
Use the machine’s cleaning/rinse function after milk drinks.
Remove user-serviceable milk parts
Disassemble only the components identified as removable in the machine instructions.
Wash and rinse
Remove milk residue thoroughly from all removable milk-contact surfaces.
Dry and refit
Allow parts to drain or dry before reassembly and storage.
MODEL-SPECIFIC CHECK
De'Longhi Eletta Explore support ↗Use the exact procedure for your machine.
Use the exact model guidance if your controls or prompts differ from this guide.
Understand the care task
Relevant Ventori care
Match the maintenance product to the job.
Descaler treats mineral scale. Bean-to-cup cleaner treats coffee residue. Water filtration manages incoming water.